Toggle Navigation
Each
Pod
Each
Pod
Podcasts
Episodes
Genres
Login
Circuit Break - A MacroFab Podcast
EP#74: Reverse Biasing Opamps
EP#74: Reverse Biasing Opamps
Author
MacroFab, Inc.
Published
Fri 30 Jun 2017
Episode Link
https://www.macrofab.com/podcasts/reverse-biasing-opamps/
Reverse Biasing Opamps
Parker
Been learning Python and
OpenCV
OpenCV is an open source computer vision library
PyImageSearch
Setup
PyCharm
Using
Requests
to use and get information from the MacroFab API
Built a 3D printed chassis for holding a
5MP USB camera
Taking pictures of PCBs and removing lens distortion
RPI3 CM PCB done
Will be testing over the weekend
6 Pack of beer riding on this board!
Board does power up correctly.
COMPIOT board Opamp blew up :(
Symbol on Schematic unlabeled for the power inputs of the opamp
Stephen
Still Making the three synth modules (two envelops and one filter)
Waiting on the
CA3146
transistor IC
This is an obsolete part
Stephen wants to use it for legacy reasons
Making some power supplies for tube mics (the same one that we made for JOSH).
Have to figure out how to make a 6.3V or 12.6V high current rail along with a 200V to 300V low current rail.
Stephen is going to use transformers that I have at my shop.
One drops 120VAC to 10VAC and the other raises the 10VAC up to 230VAC
The 10VAC rectified can potentially give 12.6VDC. If not I can drop it to 6.3VDC.
The 230VAC rectified can become 325VDC.
Pick Of the Week (POW)
130-in-1 Electronic Playground
from SparkFun
With the closure of Radio Shack where would you buy one of these intro kits?
$50 Is cheaper then Radio Shack even!
Rapid Fire Opinion (RFO)
Fail of the Week: Museum Buttons
- Hack A Day
Industrial buttons are not really kid proof
Wood Lichtenberg
- Instructables
12kV 35mA -
Neon Sign Transformer PSU
Baking soda in water as the conductor for electricity
Marinate wood in baking soda water mix
342,857.1428 ohms to pull the entire PSU load
Qualcomm fingerprint sensor enables virtual home button
- Electronics Weekly
Qualcomm has developed an ultrasonic fingerprint sensor which can operate under the glass of a mobile device avoiding the need for a mechanical home button. It also detects heartbeat and blood flow.
800 µm of cover glass and up to 650 µm of aluminum
Share to: